Recessed Acoustic Door Insulation Kit 930mm

Recessed Acoustic Door Insulation Kit 930mm

Recessed Acoustic Door Insulation

Technical Information
Size 930mm
Category Sound Insulation for Doors
Product Name Size Unit Price Qty. Sub Total
Recessed Acoustic Door Insulation Kit 930mm 930mm £50.00 £0.00
Delivered separately by courier.
Volume discounts apply automatically.

Can be cut down by up to 100mm. Also available in 730mm and 830mm width.

Product Summary

Key Points:

  • Kit designed to be fitted to existing doors
  • Can be quickly installed by a joiner
  • Gives superior look to retro-fitted product
  • Can potentially provide over 30dB of protecting depending on quality of door, and surrounding sound insulation
Doors are not just how you get into a room - they are often the main way that sound can get in too. This can be vibrational through the door frame, or airborne via the gap between the door and the floor.

A good solid door is always the first thing you should install if you haven't one in place already. It doesn't have to be an acoustic door, but anything solid is significantly better than a hollow core door. But that still leave the vibrational and airborne noise we mentioned earlier. And that is where our retro-fit acoustic door insulation kit comes in.

Our recessed acoustic door insulation kit allows you to protect against noise coming in through doorways. The seal around the doorframe creates a two part seal with he door which it is closed, reducing the airborne noise transfer. The graphite hinge pads prevent vibrational noise from being transferred to the rest of the building. The automatic drop seal is installed into the bottom of your door, and lowers when the door shuts up to 14mm - covering what is often the biggest source of sound entry in a room, almost invisibly.

The kit contains:

  • Recessed acoustic drop seal for bottom of door;
  • Three 2.1m corner seals for the sides and top of doorframe; and
  • Pack of three graphite hinge pads.

Recessed Acoustic Door Insulation Kit 930mm

Acoustic Drop Seal

Product Application

APPLICATION
Pedestrian doorsets, single and double leaf
configurations.

LENGTHS
730 - 830 - 930mm.

TRIMMING LENGTHS
100mm side opposite plunger.

FIXING TYPE
With preassembled self-tapping screws.

PLUNGER AND ADJUSTMENT TYPE
  • Self-directing articulated metal plunger with nylon cap, adjustable with a 3 mm Allen wrench.
  • Nylon plunger for lock side operation, adjustable with a 3 mm Allen wrench.
  • Square section nylon plunger, adjustable with a 3 mm Allen wrench.
  • Steel plunger, adjustable with crosshead screwdriver, slotted screwdriver, and 6 mm spanner.

TECHNICAL CHARACTERISTICS:
  • Structural internal profile in self-extinguishing co-extruded PVC.
  • Graduated scissor action (seal drops on hinge side before lock side).
  • 14 mm maximum drop.
  • Galvanised steel flat springs and actuators in PA reinforced with 20% glassfibre.
  • External profile in 6060 T6 alluminium alloy.
  • Mechanism removable from hinge side after fixing.
  • Tested to 200,000 cycles.

Corner Seal in Place

Instructions for use

The drop seal should be cut down to size with a hacksaw only on the side opposite the plunger - this can be done by as much as 100mm in necessary. The door must then be routed along the bottom edge of the door - the drop seal can then be secured into the bottom of the door with the supplied tap screws.

The corner seals are fitted as illustrated above, into the corner of the door frame, on all three sides. Simply peel off the back tape, and apply pressure to fit.

The hinge pads are placed between the hinge and the doorframe if required.

 
 

Add a review