Tecsound Tube Wastewater Wrap

Tecsound Tube S Water Pipe Wrap

Size Unit Price Qty. Sub Total
8m x 0.4m roll £39.99 £0.00
Delivery usually in 1-3 working days.
Volume discounts are applied automatically.

In stock

  • Highly dense but flexible soundproofing layer
  • Designed to acoustically insulate wastewater piping systems
  • Market leading performance

Looking for other grades of Tecsound? Also available: Tecsound 50Tecsound 50 Self-adhesiveTecsound 70, and Tecsound 100.

See our Price Match Promise

Product Summary

Tecsound Tube is a very high performance acoustic pipe wrap. Its primary function for use in effective wastewater pipe sound proofing. It consists of an upper-face consisting of Tecsound, a synthetic and viscoelastic, polymer based, bitumen-free high density membrane, and a lower-face with a non-woven polyester fleece.

It increases the acoustic insulation of the pipe by around 15db. This high performance is due mainly to the inclusion of highly absorbent tecsound and high density membrane.

Technical Specifications

Size 8m x 0.4m roll
Thickness 4.75mm
Density / Weight 3.75kg/m2 (roll weight 12kg)
Fire Rating M1
Unit Price (ex VAT) £39.99
Unit Price (inc VAT) £47.99
Category Tecsound

Product Application

  • Acoustic insulation of water, rain and drain pipes in buildings.
  • High sound insulation of pipes, with the combined effect of an absorbing and a sound-insulating viscoelastic material.
  • Reduction of the transmission of vibrations in pipes, caused by drainage of liquids, to the structure (transmission of structural noise), as well as contact noise in bends.
  • Flexible and adaptable to all types of piping (round or square) and connections, ensuring the continuity of insulation so eliminating the need for specific pieces for bends and connections.
  • Good behaviour at low temperatures, without breaking or cracking.
  • Easy to handle and cut.
  • Simple installation thanks to low thickness. Suitable for renovation.
  • Ageing resistance.
  • Rot resistant.

Tecsound Tube S acoustic pipe wrap being fitted

Instructions for use

Measure the circumference of the pipe and add 50 mm for the overlap and cut to the desired length. It is recommended to cut strips smaller than 1.0-1.2m to facilitate handling.

Wrap the product around the pipe so that the polyester fleece touches the entire surface and overlaps in the longitudinal direction. Start at the bottom of the pipe and work your way up. Do not overlap the transverse joints (only butt joint), but connect tightly to avoid gaps. Secure the strips with cable ties every 30-40 cm. Ideally the overlaps should be sealed with an aluminium backed foil tape.

Where the pipe is boxed in, ideally use a double layer of plasterboard to finish, filling the void where possible with mineral wool.

The acoustic improvement of the pipe wrap is c15 db.

Tecsound Tube Acoustic Performance