StepTile Anti-slip Acoustic Tile
Delivery usually in 1-3 working days.Volume discounts are applied automatically.
- Premium grade rubber tile
- For gardens, playgrounds and roofs
- Anti-slip as well as acoustically insulating
Volume Discounts are applied automatically above, just add your quantity.
| Quantity | Discount | Price per Unit |
|---|---|---|
| 1 - 60 | 0.0% | £9.99 |
| 61 - 180 | 5.0% | £9.49 |
| 181 - 449 | 8.0% | £9.19 |
| 450+ | 10.4% | £8.95 |
Product Summary
The Soundstop rubber StepTile is a premium grade rubber tile
system with each tile weighing 5.2Kg. this is a more robust product that
other cheaper versions on the market. There are many tiles on the
market, but the rule of thumb is the heavier the better. Before making
your decision compare the weight!
The tiles not
only provide superior noise reduction but offer an excellent
slip-resistant surfacing for rooftop patios, kids play areas, home gyms,
decks, walkways for apartment complexes, office buildings, schools,
hospitals, restaurants, and much more. The tiles can be installed on
concrete, asphalt or a compacted granular base. The porous nature of
design allows water to easily flow through and around the tiles.
They can be laid onto virtually any surface including felt roofs, concrete roofs, EPDM and even fibre glass roofs.
The tile features anti-slip qualities as well as noise deadening. Achieving a decibel reduction in excess of 30dB.
The
tiles are ideal for children’s play areas increasing the critical fall
height to 1m making it great for elderly customers as well.
The tiles have been manufactured to exacting European standards using grade 1 recycled rubber granulate materials, these have been bonded with binding polymers and then coloured with iron oxide pigments.
The installation of the tile is very straightforward as they are held together with plastic pins that are integral to the design. This obviates the need for any form of adhesive. This makes the installation a truly DIY job.
Size: 500mm x 500mm x 30mm thick
StepTile 500mm x 500mm Black
Technical Specifications
| Size | 0.5m x 0.5m 5.2kg per Tile |
| Fire Rating | - |
| Unit Price (ex VAT) | £9.99 |
| Unit Price (inc VAT) | £11.99 |
| Category | Flooring Products |
Product Application
This versatile rubber tile can be used in many places. It can be used in the garden on the roof as a durable non slip roof terrace surface. It can be used when reducing impact sound on balconies or any outside space.Advantages of the tile:
Simple non-glued installation with 4 integrated connector pins
Advantage: the 30mm thick slabs are securely bonded together preventing displacement or buckling
Individual slabs can be replaced at any time
Advantage: replacing slabs is fast and easy with no mess
Advantage: replacing slabs is fast and easy with no mess
Superb quality, simple to care for
Advantage: long life (even at below-freezing temperatures), easy to clean
Advantage: long life (even at below-freezing temperatures), easy to clean
Eye-pleasing colours, can be combined as desired
Advantage: highly decorative, individualised surfacing fits in perfectly with surroundings.
Safe
Advantage: no danger of injury, can be walked on barefoot (no splintering as found on wood).
Advantage: no danger of injury, can be walked on barefoot (no splintering as found on wood).
Thermal insulation and noise deadening
Advantage: warm and quiet floors
Advantage: warm and quiet floors
Slip resistant and quick drying (e.g. after rainfall)
Advantage: safety for your children
Advantage: safety for your children
Environmentally friendly
Instructions for use
Installation InstructionsBefore installing tiles ensure the surface is level, free from dirt and grit, free draining and ready receive rubber tiles.
As with most tiling jobs begin laying the tiles in one corner of the area being tiled, make sure the pins are facing in the correct direction ready to go into the corresponding receiving holes, this will be facing out in the direction of installation. After the first row has been laid check the alignment is correct before continuing. Every second row must be laid in a brick-bond pattern leaving a half tile at each end. This will result in an interlocking formation to maximize the overall bond.
The tiles can be cut with a low-speed jig-saw (medium sized teeth), handsaw or Stanley-knife. It is recommended a steel straight edge is used for best results. Keep the cutting blade cool with water where possible.
Exposed edges which may be subject to wind uplift can be adhered to the substrate using a suitable rubber adhesive.
Detailed installation instructions can be found here.
Maintenance
Keep clean where possible with a regular broom or soft brush or a heavy-duty vacuum cleaner (ensuring the mechanical drive brush is soft enough to avoid damage to the tile surface). To remove dirt, moss, foods etc, scrub with a soft brush using warm water and a highly diluted detergent. Then rinse well with copious amounts of clean water.
Maintenance
Keep clean where possible with a regular broom or soft brush or a heavy-duty vacuum cleaner (ensuring the mechanical drive brush is soft enough to avoid damage to the tile surface). To remove dirt, moss, foods etc, scrub with a soft brush using warm water and a highly diluted detergent. Then rinse well with copious amounts of clean water.
Pressure washers can be used to clean tiles. A minimum distance of 35cm should be maintained between the spray nozzle and tile surface to prevent impact pressure, ensure the water temperature does not exceed 80°C. After cleaning, remove all contaminants that may have exuded from the tiles. Scrub with a soft brush and warm water with a highly diluted detergent then rinse well with copious amounts of clean water.
