Wall Isolation Strip 100mm

Size Unit Price Qty. Sub Total
100mm x 5mm x 10m £23.99 £0.00
Delivery usually in 1-3 working days.
Volume discounts are applied automatically.

Out of stock

More coming soon! Phone 0208 123 9710

See our Price Match Promise

Product Summary

The Soundstop Wall Isolation Strip is the first acoustic joist treatment which combines low cost with effective sound attenuation.

The isolation strip is made from over 90% recycled rubber, moulded in a dense material to give superior soundproofing performance.
The isolation strip profile also includes a self-adhesive backing which sticks tightly to a rough cut or planed standard nominal 100mm stud resulting in a stable wall, completely isolated from the rest of the structure. The product is also available in a 50mm width, allowing it to be used on joists to create a floating floor.

The top contact surface optimises the acoustic attenuation properties of the rubber. By moving the mass layer above the resilient layer the floating element forms a stiffer structure spreading the load and lessening the diaphragm affect, whilst the resilient layer acts to dampen and absorb the sound energy.

Technical Specifications

Size 100mm x 5mm x 10m
Thickness 5mm
Density / Weight 725kg/m3
Type 100mm
Unit Price (ex VAT) £23.99
Unit Price (inc VAT) £28.79

Product Application

Where you are looking to create a floating wall working directly off stud walls then the isolation strip is a very cost effective means of doing so.

The isolation strip fit snugly onto the existing studs up to a width of 100mm. The wall substance can then be installed on top of it. We would recommend the use of angled flanking band in this set up to effectively seal the sides against the floor.

A superb, easy to fit, the Soundstop Wall Isolation Strip can be used in both new build and refurbishment projects for timber and masonry builds.

This product, used upside down, can also provide the resilient layer required for customers to make up their own resilient battens. 

Our experience has shown that this product will produce around 3-5 dB of improvement in sound attenuation.

Instructions for use

Care should be taken to comply with all relevant Safety and Building Regulations.

Simply removed the self-adhesive backing and sit the strip over the joist ensuring the base is located tightly with the joist surface. It is advised that the joist surface is clear of dust and grime before attaching the strip as this may reduce the adhesive properties.

In all applications, our perimeter isolation strip must be used so the floating floor is fully isolated for the structural floor and walls.