GenieClip LB2

Size Per Clip
Type LB2
Category Genie Clips
Product Name Size Unit Price Qty. Sub Total
Genie Clip Type LB2 Per Clip £5.79 £0.00
Delivered separately by courier.
Volume discounts apply automatically.

Volume Discounts apply to this product just add your quantity.
1-49          £5.79
50-99        £5.62
100-199   £5.50
199-1000 £5.39
1000+ Please enquire

Product Summary

The GenieClip™ is an innovative Canadian product which offers significantly better protection against transmission when compared to a resilient bar.

The LB2 type fixing now means that you can fit the GenieClip™ with less height loss. Or alternatively you can use it to act as an extender of the GenieClip™ system to allow services to be run between the joist and the ceiling. Please see our fitting guide for more information. This is confined now to the depth of the furring strip ( 23mm). If you are looking for a zero height loss we recommend you look at the Type LB3 clips.

This system is very useful where you wish to level up an uneven ceiling or conversely you wish to drop the Genieclip system lower and allow room for services such as plumbing or electrics. Please see fitting guide for more details.

The GenieClip™ superior performance stems from the generous moulded rubber body that sits within a galvanized steel frame work offering exceptional isolation. The GenieClip™ can be successfully used as part of a regulation E system. It is important to understand that the GenieClip™ system should be used in conjunction with the bespoke Soundstop furring strip and note that other metal sections will not fit.

If you wish to buy just the GenieClip™ alone please be aware that you will need to buy the bespoke furring strip as well.

Soundproofing Solutions Incorporating The GenieClip™ [more]

The GenieClip™
However if you are looking to buy them as part of a ceiling construction we recommend you go to The GenieClip™ ceiling systems. This page will contain an easy to use set of materials calculators and full fitting instructions for soundproofing a ceiling

If your looking for a wall soundproofing solution then we would recommend The GenieClip™ wall systems. This page will contain an easy to use set of materials calculators and full fitting instructions for soundproofing a ceiling

For an idea of how many The GenieClip™s you will need you can use the following calculator.




Comparison of untreated ceiling v resilient bar v GenieClip system
Further Information [more]

For those customers wanting to incorporate the highest performance materials into their soundproofing projects we introduce the GenieClip™ solution. The GenieClip™ is a very high performance solution that provides the best single component we know when soundproofing a wall. The clip itself outperforms a resilient bar by around 7 db, an impressive amount.

The GenieClip™ is screwed direct to stud, working in the same manner as that of a resilient bar system and it houses "furring strips". To these furring strips plasterboard is screwed.

The GenieClip™ system is a superior alternative to the conventional resilient bar system producing better performance and is far less prone to fitting error. In fact its virtually impossible to fit incorrectly.

The GenieClip™ is a moulded rubber and steel isolation clip used to to control the passage of noise. The integral springing mechanism providing much more dampening than the corrugations of a resilient bar system. In fact performance numbers are superior even with a single layer of plasterboard potentially saving on materials cost and labour.


Comparison of installation of resilient bar versus GenieClip


GenieClip LB2
 
 

Add a review