Acoustic mineral wool 100mm

AMW 60 100mm 60kg/m3

Size Unit Price Qty. Sub Total
2.88m2 - 4 x 100mm Slabs of 0.6m x 1.2m £38.10 £0.00
Delivery usually in 1-3 working days.
Volume discounts are applied automatically.

In stock

Volume Discounts are applied automatically above, just add your quantity.

Quantity Discount Price per Unit
7 - 16 0.0% £38.10
17 - 25 0.0% £38.10
26 - 100 0.0% £38.10
See our Price Match Promise

Product Summary

Acoustic mineral wool is designed to work specifically at reducing the passage of airborne sound. It will also help reduce reverberant sound. It is important to differentiate it from light weight loft insulation which weighs only around 12kg/m3.

Technical Specifications

Size 2.88m2 - 4 x 100mm Slabs of 0.6m x 1.2m
Type 100mm 60kg/m3 density
Fire Rating EN 13501-1 - A1
Unit Price (ex VAT) £38.10
Unit Price (inc VAT) £45.72
Category Specialist Mineral Wools

Product Application

The typical application for acoustic mineral wool is to absorb sound passing through a void. The mineral wool acts to absorb sound and reduce reverberation. Please note that this is not a loft type insulation type wool but a high density wool specifically designed to combat noise. Anything on a roll is simply not dense enough.

Instructions for use

The density of Acoustic Mineral Wool (starting at 45kg/m3) is specifically designed to be more efficient than many alternative methods of sound control and is the optimum solution when looking for an effective acoustic insulation to give added soundproofing control when installed between the joists of floors and into stud partitions. 
60kg AMW typically provides a reduction in airborne noise levels of up to 4-5dB when fitted in between floor/ceiling joists. 
60kg AMW typically provides a reduction in reverberant noise levels of up to 10dB when fitted in ceIling constructions.

We often recommend acoustic mineral wool under the floors when carrying out soundproofing work next to a party wall. This will help in cutting out sound which will travel through the party wall under the floor boards. Ideally the void should be packed and the mineral wool applied about 0.6-1m deep hard against the party wall. Filling the void. See party wall solutions

It is non-flammable and chemically inert and is not adversely affected by any substance it may come into contact with. Random arrangement of fibres ensures no water penetration in any direction. It is rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, moulds or bacteria.